by makeme

Archive for December, 2011|Monthly archive page

3D Printers You Might Not Have Heard About

In Uncategorized on 07, Dec, 2011 at 22:23

The Felix 1.0 can be found at for about $1100. Designed by Guillaume Feliksdal because he has experience in mechatronics and he thought RepRaps took too long to put together and calibrate. The kit is mostly aluminum t-slot extrusions. It does not seem to be open source, but it is reportedly quick to assemble and calibrate, taking only 2-6 hours to go from zero-to-printing.

“…I love…to realize innovative technical ideas. The printer could also be useful for making my future inventions.” – Guillaume Feliksdal

The Orca 0.30, designed by Gubbels Engineering, can be found at The kit is pretty much entirely steel rod and (anodized!) aluminum sheets, is about $800, and seems to be intended to be open source when the design is finalized.

The Mosaic, designed by Rick Pollack, can be found at The kit is mostly laser-cut plywood with pre-assembled precision linear guides, is about $1000, and doesn’t appear to be open source.

The Printrbot can be found at Designed by Brook Drumm because he figured people needed a printer that was a lot simpler and easier. The kit is about the most minimal combination of ABS and steel rod imaginable, is listed as $500 on the kickstarter page, and a lot of noise has been made about making it open source when the design is finalized.

Printrbot-Mystery-Print from Printr Bot on Vimeo.

The Prusa Air is Mecano’s redesign of the Prusa Mendel. It replaces a lot of the metal and plastic parts with flat sheet. Here it is on and the RepRap wiki. He says that the design evolved out of an attempt to make the Prusa more attractive and intuitive enough that someone could put it together after glancing at a picture. He has a version 2.0 on the way.

“Eventually I would like to see, apart from improvements in 3D printers, laser cutting open hardware, open hardware lathes, open hardware phones, etc” – Mecano

The Rook Printer by Jolijar can be found on Thingiverse and at Jolijar’s blog. He’s replaced the vast majority of the RepRap frame with t-slot aluminum and has redesigned the printed parts accordingly.

The Solidoodle 3D Printer, designed by Sam Cervantes, can be found at This is a somewhat unusual design. Most of the functional parts are laser-cut wood, but the whole thing is enclosed in a steel frame that protects the whole printer. It only comes fully assembled for $700. The design doesn’t seem to be open source, but they do have a Facebook page. So you’ll have to make due.

The 3D Micro Printer is a stereolithography system that’s about the size of a large book and is only about $1600. It is the result of collaboration between teams led by professor Jürgen Stampfl and professor Robert Liska at the Vienna University of Technology. The prototype was developed by Klaus Stadlmann and Markus Hatzenbichler. The real strength of this approach, and the reason the overall machine is so small, is that it can be used to print very precise parts. This first generation prints in layers 50 microns (0.050mm) thick.

The following are even farther off the beaten path because they are CNC mills.

Don’t let that be a reason for ignoring them! Unlike a dedicated 3D printer, a CNC mill can do both additive and subtractive work (3D printers aren’t rigid enough to hold a carving tool in place without wobbling).

The MTM Snap has an exceptionally clever design. It was designed by Jonathan Ward at MIT’s Center for Bits and Atoms and it actually snaps together. Yes, snaps. The entire structure is rigid enough for milling but doesn’t include a single fastener. It is open source.

The White Ant was designed by Patrick Hood-Daniel and can be found at Looks like it’s around $1000, but for that you get a machine that’s specifically designed to be either a 3D printer or a CNC mill. It’s a compliment to the book, Printing In Plastic, which takes you through the entire build process. It’s extremely hackable, as the design has been released under the Creative Commons license (free to reproduce) and, while it’s cleaner to CNC mill the wood pieces, the entire thing can be made in a garage with power/hand tools.

“I would like to see a machine that would be able to fabricate using multiple materials in one process…I will be developing an SLS machine kit in the near future.” – Patrick Hood-Daniel

ZEN Toolworks, owned by Xin Chen,  has several variations of a hobby CNC. They also have a very nice wiki for learning about their kits. The CNC mill is about $810 and they have a conversion kit for $80 that makes the build volume more suitable for 3D printing. They don’t sell any extruders and Xin explained that they don’t sell a complete kit (mechanical and electrical) for 3D printing because they figure it’s better to get 3D printing-specific electronics from somewhere else. However, you can pick up the mill itself (just mechanical) for about $450 and get the electronics & extruder from a different vendor. This product is not open source.

The micRo (yes that’s how it’s spelled) is available at for around $700. You’ll get the CNC mill which you can use for 3D printing if you mount an extruder or syringe. LumenLabs does seem to be working on a high-precision 3D printing addition to turn the micRo into the UNIFAB, but there’s not much information at the moment.

Maybe you prefer your projects a bit more…freeform. If so then check out how many 3D printers/CNC machines there are on

So there you have it. The 3d printing world is a lot bigger than RepRap and Makerbot! The great thing is that more and more of these new designs are showing up all the time. Pretty soon there will be such a huge selection you’ll be able to find one that exactly suits your requirements. Additionally, the point of this post was little-known 3d printers. If you know of one that I missed please share that information with everyone else.